Sunday, February 11, 2018

Treehouse Roof



We spent the morning and part of the afternoon cutting the curved rafters for the roof of the treehouse. The rafters are about six feet long and have an 18 foot diameter circle curve on the outside, and a similar curve on the lower side only on the exterior and on the eaves.  We have now installed about 25% of them on the treehouse.  We should install the remaining ones tomorrow along with the facia boards and the plywood.



Today, we installed the remaining rafters, installed 1/2" plywood over most of the rafters, and a fascia board on one side only.

No comments:

Post a Comment